Please note this is very much BETA code but does work
Supported Transmitters
The FrSky Transmitter Picture tool currently supports 6 transmitters, grouped by their screen size/format requirements:
| Transmitter | Image size | Formats |
|---|---|---|
| FrSky X20 | 300×280 | PNG only |
| FrSky SE | 300×280 | PNG only |
| FrSky X18 | 180×166 | PNG or BMP (BMP recommended) |
| FrSky Twin | 180×166 | PNG or BMP (BMP recommended) |
| FrSky X10 | 180×160 | PNG or BMP (BMP recommended) |
| FrSky X12X | 180×160 | PNG or BMP (BMP recommended) |
For FrSky X20RS (and probably others) follow these steps.
- Once you have used the utility below to upload, crop and download your image
- Put your TX in Bootloader mode, press Enter and On button at the same time (this may also work in USB mode)
- Plug in your USB cable
- Open the drive that has just been mapped, open the bitmaps > images folder
- Copy your downloaded cropped image into the images folder, you may want to give it a friendly name first
- Disconnect your TX
- Edit your model on your TX
- Change Picture to the file you just copied across
Configuring Home page widget
- Set widget type to Bitmap
- Set bitmap type to “Model bitmap”
Done!
I’ll improve on these instructions when I get time!
FrSky Transmitter Picture Utility
Upload images, crop them to fit your FrSky transmitter's model-select screen, and download as PNG or BMP.
115
Page Views
11
Images Uploaded
7
Images Converted
93
Users
No images uploaded yet. Upload an image to get started.
Crop & Convert
